2023 John Deere 2630 Series 2633

2023 John Deere 2630 Series 2633

• Features John Deere TruSet™ Tillage Technology

• Radial Tire Option

• Knife-edge Rolling Basket

• Extended-Life Bearing

Features may include:

• The John Deere 2630 Series offer three disk models that provide a wide range of variety for all tillage applications.

• John Deere's 2630 Series Disks offer different blade options for soil penetration and residue sizing.

• The 2633 Dual-Purpose Disk comes equipped with front solid- or cutout-spherical blades and rear solid spherical disk blades with 230-mm (9-in.) spacing. The base blade size is 610 mm x 5 mm (24 in. x 0.197 in.).

• Available blade options for the 2633 are listed below.

• 230-mm (9-in.) spacing, front and rear

• Good for seedbed preparation and chemical incorporation in medium to heavy soils

• Works well in primary tillage in light to medium soils

• Provides good residue-handling capability

• John Deere's 2630 Series Disks provide an innovative approach to tension disk gang bolts.

• Hydraulic fore-aft leveling comes as standard equipment with John Deere 2630 Series Disks. Operators can level the disk from the comfort of the tractor cab.

• As crop yields increase, so does the amount of residue after harvest. The John Deere 2633 and 2635 Disks provide operators with a disk that can be set to prepare a seedbed for planting or set to bury and size tough residue in primary tillage applications.

• John Deere’s mechanical wing control helps producers keep their frames level for five-section disks. Mechanical wing control is included in base equipment for all five-section 2630 Series Disks.

• With this feature, a large spring is placed in the wing frame on each side of the disk. As the pivot point in the wing starts to raise, the spring presses against that point to keep the disk level through tough field conditions.

• The red circles in the following image illustrate the area of the disk where the large spring is placed in the wing frame.

• John Deere mechanical wing control is an industry-exclusive feature. A five-section disk without mechanical wing control can show up to 75-mm (3-in.) of depth inconsistency across the wing frame.

• John Deere 2630 Series Disks and Vertical Tillage Implements feature extended-life bearings. These more durable and reliable bearings allow producers to customize bearing maintenance for specific growing conditions and soil types.

• The flange-mounted bearing and sealing system features improved contamination resistance. The advanced seal material is highly resistant to wear and damage caused by abrasive soils and other crop materials. The design of these is more durable and reliable than previous bearings.