2019 John Deere E160

Selling Price -

$1,500.00

2019 JOHN DEERE E160 LAWN TRACTOR; 48" DECK; 24HP V-TWIN ENGINE; HYDROSTATIC TRANSMISSION; ADJUSTABLE HIGH-BACK SEAT. For more information contact Sean Goering with American Implement AUTOTRAC 620/386/6279 or sgoering@americanimplement.com

Information

  • Width:48 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD

Photos

Highlights

  • $1,500.00
  • Colby
  • Pre-Owned
  • 119827
  • 2019
  • John Deere
  • E160
  • 1GXE160EKKK107182
  • Model: 44U877 (M44)
  • 24
  • Gasoline
  • Available
  • With mower: 60.8 in. (154 cm) | With mower (deflector raised for storage): 50 in. (127 cm)
  • 45.3 in. (115 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)

Specifications

  • 2019
  • John Deere
  • E160
  • Base
  • Riding
  • Model: 44U877 (M44)
  • Overhead valve, full-pressure lube, oil filter
  • 24 hp (17.9 kW)
  • 44.2 cu in. (724 cc)
  • V-twin
  • Mechanical
  • Speed control: One lever, ReadyStart®
  • Air
  • Cartridge with prefilter
  • Transaxle: Not serviceable
  • Gasoline
  • Delivery: Pulse pump and carburetor
  • Mechanical, viewable from seat
  • Mower: Electric power take-off (PTO) clutch
  • Sector and pinion with single drag link and tie rod
  • Fuel tank location: Rear | Hourmeter: with service reminder | Oil cooler: Fins and fan on transaxle | Primer/paint: E-coat/powder | Floor mats: with debris removing channels | Storage: Storage tray with cover | Service interval decal | Handgrips | Cup holder | Mower deck type: Side discharge | Mower wash port
  • Internal wet disk
  • Full-length welded steel
  • Cast-iron front axle, powdered-metal front wheel bushings
  • 15x6-6
  • 20x10-8
  • Mower: Four
  • Engine: Bendix type
  • Regulated, 16 amp
  • 12 V (300 CCA)
  • Transaxle Forward speed: 0-5.5 mph (0-8.9 km/h) | Transaxle Reverse speed: 0-3.2 mph (0-5.1 km/h)
  • Fuel fill opening, Center: 1.75 in. (4.45 cm) | Uncut circle radius: 20 in. (50.8 cm)
  • 69.5 in. (176.5 cm)
  • 45.3 in. (115 cm) | Mower cut: 1-4 in. (2.5-10.2 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 60.8 in. (154 cm) | With mower (deflector raised for storage): 50 in. (127 cm)
  • 48.9 in. (124.2 cm)
  • 48 in. (122 cm)
  • 18 in. (45.7 cm)
  • Back: 15 in. (38.1 cm)
  • Fore-aft adjustment (While seated): 5.5 in. (14 cm)
  • Deluxe, diameter: 14 in. (35.6 cm)
  • Tank: 2.4 U.S. gal. (9.1 L)
  • Mower, no fuel: 492 lb (223 kg)
  • Two standard, incandescent
  • Reflectors
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • One piece with lumbar adjustment | Suspension: Tilt, two coil springs
  • Type: Lever on fender deck
  • Hood: JD Loy, UV resistant
  • Fender: Stamped steel | Mower: Stamped steel deck shell, 12 gauge 0.105 in. (2.7 mm)
  • Standard