Information
2024 JOHN DEERE 1025R CUT TRACTOR; OPEN STATION; HYDROSTATIC TRANSMISSION; MFWD; W/ JOHN DEERE 120R LOADER & BUCKET NO SPHC; LESS IMATCH QUICK HITCH; 26X12-12 R3 TURF REAR SINGLES; 18X8.50-10 R3 TURF FRONT SINGLES; M-MODEM,
Highlights
Location Garden City Condition New Stock Number 119573 Year 2024 Make John Deere Model 1 Series 1025R Engine Model: 3TNV80F-NCJT Transmission Hydrostatic - two range Fuel Type Diesel Status Available Serial Number 1LV1025RCPR882098
Specifications
Year 2024 Manufacturer John Deere Model Name 1 Series Trim Name 1025R Generic Type (Primary) Compact Engine Model: 3TNV80F-NCJT Engine Power SAE J1995 rated power: 23.9 hp (17.8 kW) / 3200 rpm at 21.8 PS / 3200 seconds at 24.2 PS Engine Manufacturer Yanmar® Rated Engine Speed 3200 rpm Aspiration Natural Emissions Compliance: Final Tier 4 Cylinder Liners Three cylinders | Cast-in-block Displacement 77.3 cu in. (1.267 L) Bore 3.15 in (80 mm) Stroke 3.31 in. (84 mm) Lubrication Pressurized Cooling System Water pump Air Cleaner Dual element with mechanical restriction indicator Engine Torque At rated speed: 39.2 lb-ft (53.1 Nm) PTO Power, Rated Engine Speed Power take-off (PTO) power: 17.2 hp (12.8 kW) | Rear: 540 rpm / Mid: 2100 rpm PTO Type Control: Independent Fuel System Indirect injection Fuel Type Diesel Compression Ratio 23.1:1 Injection Pump Type Indirect injection Transmission Hydrostatic - two range Final Drive Spur gear Steering Power Clutch Wet disk Brake System Type Wet disc (left-hand pedal) Tires, Front Specification R3 Turf: 18x8.50-10 / R3 Turf Radial: 18x8.50-10 / R4: 18x8.5-10 Tires, Rear Specification R3 Turf: 26x12-12 / R4: 26x12-12 Battery 500 CCA Alternator 40 amp Electrical Starter size: 1.6 hp (1.2 kW) Hydraulic Type Open center | Remote control valves available: Three Hydraulic Pump Steering: 3.5 gpm (13.2 L/min) / Implement: 3.5 gpm (13.2 L/min) / 6.3 gpm (24 L/min) Pump Type Single gear Maximum Pressure 2000 psi (138 bar) Hitch/Type Limited Category 1 Dimensions Front axle clearance: 7.7 in. (195 mm) | Front tread range: 36.7 in. (931 mm) / Rear tread spacing: 35.2 in. ( 895 mm) Wheelbase 57.1 in. (1450 mm) Turning Radius Without brakes: Outside front tire: 8.2 ft (2.51 m) Hitch Lift Capacity 24-in. behind link arms: 758 lb (344 kg) Fuel Capacity 6.3 U.S. gal. (24 L) Axle Capacity, Front 1349 lb (612 kg) Axle Capacity, Rear 1576 lb (715 kg) Features Draft control sensing: Position control | Platform - flat/straddle: One-piece semi flat | Gear shift location - console/floor: Left-hand side | Doors: Two Hydraulic Capacity Transmission and hydraulic system: 3.2 gal. (12.3 L) Weight, As Shipped Approximate shipping weight (open-station): 1556 lb (706 kg) / Cab: 1996 lb (906 kg) Seat Type equipment: Premium serial number 1LV1025RCPR882098
