2025 JOHN DEERE 320G SKID STEER; 2-SPEED; OPEN ROPS; EH (ISO PATTERN) JOYSTICK CONTROLS; VINYL MECHANICAL SEAT; MANUAL QUICK TATCH; REGULAR HYDRAULICS; SELF-LEVELLING; 2 SETS OF COUNTERWEIGHTS; COLD START PACKAGE; ENGINE AIR PRECLEANER; 12X16.5 10-PLY PR TITAN HD2000-II TIRES; 72" CONSTRUCTION BUCKET W/ EDGE.
- 2025
- John Deere
- 320G
- Base
- General
- 4TNV98C
- Yanmar
- SAE Net Power: 49.4 kW (66 hp) | SAE Gross Power: 51.7 kW (69 hp) | Hydraulic Power: 28.842 kW (38.6 hp) | Hydraulic Power - Option: 41.414 kW (55.5 hp)
- 2500 rpm
- 3.3 ltr (203 Inches³)
- 241 Nm (178 lbf / ft) | Axle - Maximum: 6771 Nm (4994 lbf / ft)
- Tier 4
- Naturally Aspirated
- Chain Rating: 80 - HD
- 12 - 16.5 - 12 PR SKS
- Tipping Load - Foundry: 1989 kg (4380 lbs) | Breakout - Bucket Foundry: 26.6 kN (6000 lbf) | Breakout - Lift Foundry: 16.5 kN (3725 lbf) | Rated Operating Capacity - Foundry: 994 kg (2190 lbs)
- Speed - Maximum: 11.1 kph (6.9 mph) | Maximum Option: 17.9 kph (11.1 mph)
- Pump Output: 78 lt/min (21 gallons (US) / min) | Pump Flow - Option: 112 lt/min (30 gallons (US) / min)
- 224.08 bar (3250 PSI)
- Dump Angle: 43 Degrees | Rear Departure Angle: 28 Degrees | Rollback - Ground Level: 33 Degrees
- 2060 mm (81.1 inches)
- to Hinge Pin: 3100 mm (122.2 inches) | Reach - Max Dump Foundry: 740 mm (29.2 inches) | Dump - Maximum Foundry: 2480 mm (97.7 inches)
- No Bucket: 1700 mm (67 inches)
- No Bucket: 2850 mm (112.3 inches) | With Bucket Foundry: 2460 mm (136.3 inches)
- 1120 mm (44.2 inches)
- 240 mm (9.3 inches)
- Tank: 79 ltr (21 gallons (US))
- 3246 kg (7150 lbs)
- 1T0320GKKSJ477537
- Hugoton
- New
- 116629
- 2025
- John Deere
- 320G
- 4TNV98C
- Available
- No Bucket: 1700 mm (67 inches)
- to Hinge Pin: 3100 mm (122.2 inches) | Reach - Max Dump Foundry: 740 mm (29.2 inches) | Dump - Maximum Foundry: 2480 mm (97.7 inches)
- 1T0320GKKSJ477537