2019 JOHN DEERE 2032R CUT TRACTOR; HYDROSTATIC TRANSMISSION; MFWD; OPEN STATION; NEW SEAT; ROPS; 2 SCVS; CAT1 IMATCH HITCH; 14-17.5 R4 REAR SINGLES (GOOD); 23X8.50-14 R4 FRONT SINGLES (GOOD); W/ JOHN DEERE 220R LOADER W/ BUCKET. (SOLD TOGETHER). For more information contact Tony Butts with American Implement at 785/269/7350 or tonybutts@americanimplement.com
Information
Front Axle:MFWD Factory Installed Loader with Bucket iMatch Quick Hitch Category 1 14-17.5 (4PR, R4 Industrial, 1 Position) Bias Ply 23X8.50-14 (4PR, R4 Industrial, 1 Position) Bias Ply
Highlights
Sale Price $25,000.00 Location Colby Condition Pre-Owned Stock Number 99655/99658 Year 2019 Make John Deere Model 2032R VIN 1LV2032RLJJ105915 Horsepower 32 Engine Hours 58 Transmission Standard transmission; forward/reverse: Hydrostatic | Final drive: Bull Gear | Brakes: Wet disc | Fuel Type Direct injection Status Available
Specifications
Year 2019 Manufacturer John Deere Model Name 2032R Trim Name Base Generic Type (Primary) Compact Engine Manufacturer Yanmar 3TNV88C-NJT Engine Type Direct Injection Engine Power Rated: 23.3 kW (31.2 hp) Rated Engine Speed 2500 rpm Displacement Cylinders: 3 / 1.642 L (3 / 100.2 cu in.) Injection Pump Type Direct Injection Aspiration Natural Bore 88 mm (3.46 in.) Stroke 90 mm (3.54 in.) Compression Ratio 19.1:1 Lubrication Pressurized Cooling System Water pump Air Cleaner Dual element Engine Torque at rated speed: 86 Nm (63.4 lb-ft) Final Drive Type: Spur Gear Fuel Usage, 100% Load 5.8 L/hr (1.5 U.S. gal./hr) Fuel Type Direct injection PTO Type power: 18 kW (24.2 hp) Standard PTO Rear - 540 rpm | Mid - 2000 rpm Transmission Standard transmission; forward/reverse: Hydrostatic | Final drive: Bull Gear | Brakes: Wet disc | Hydraulic Type Open center Hydraulic Flow rated output: Steering 15 L/min (4 gpm) | Implement: 20.2 L/min (5.3 gpm), 35.2 L/min (9.3 gpm) Steering Power steering Pump Type Gear Maximum Pressure Operating: 172.37 bar (2500 psi) Battery 500 CCA Alternator 12-V: 85 amp Starter Size: 1.4 kW (1.9 hp) Tires, Rear Specification R1 Ag 12.4-16 | R3 Turf 14-17.5 | R4 Industrial 14-17.5 | R3 Turf Radial 300/70 R20 Tires, Front Specification R1 Ag 7.00-12 | R3 Turf 23x8.50-14 | R4 Industrial 23x8.50-14 | R3 Turf Radial 200/60 R15 Axle Capacity, Front 880 kg (1940 lb) Axle Capacity, Rear 1089 kg (2400 lb) Dimensions Turning radius with brakes: 2.75 m (9.02 ft) | Turning radius without brakes: 3 m 89.84 ft) Wheelbase 172.5 cm (67.9 in.) Fuel Capacity 32 L (8.5 U.S. gal.) Hitch Lift Capacity 3 Point Category 1 | 24-in. behind link arms: 615 kg (1356 lb) Oil capacity Crankcase with filter: 2.7 L (2.9 qt) Weight Approximate shipping (open-station; cab): 1105 kg (2436 lb) Features Emissions compliance: Final Tier 4 | Number of cylinders: Three | Cylinder liners: Cast-in-block | Draft control sensing: Position control | Remote control valves available: Up to three | PTO Control: Independent | Clutch: Independent | Brake (for mid and rear PTO): Wet disc | Rollover protective structure: Type Foldable ASABE S478 | Platform - flat/straddle: Flat | Gear shift location - console/floor: Left-hand side | Toolbox | Tilt steering wheel